MDF.H

  • JSC "Vitsebskdrev" is the only woodworking enterprise in Belarus that has launched the production of an innovative product – a moisture–resistant plate (MDF.Н).
  • Moisture-resistant MDF (MDF.H), unlike the usual one, has a denser structure. Therefore, the plate is not subjected to swelling, and its surface is not destroyed by the action of condensate. The plates obtained in this way are used in wet areas, exclusively inside the building, and can withstand accidental contact with wate
  • In June 2020, the company received a certificate of conformity registered in the National System of Conformity Assessment of the Republic of Belarus for compliance with the requirements of STB EN 622-5-2009. The new type of plate is mass-produced in formats 2440x1830 mm and 2440x1220 mm, thickness from 10 to 30 mm. At the request of the Customer, the cutting of products is possible.

    Physical and mechanical indicators of MDF.H

    Density, kg/m3 650÷900

     

    Humidity, % 4÷11

     

    Swelling in thickness per 24 hours, %
    The norm for plates with a thickness of, mm:
    >9-12 mm % no more 10
    >12-19 mm % no more 8
    >19-30 mm % no more 7

     

    Transverse tensile strength, MPa, not less
    The norm for plates with a thickness of, mm:
    >9-12 mm % not less 0,80
    >12-19 mm % not less 0,75
    >19-30 mm % not less 0,75

     

    Bending strength, Mpa, not less
    The norm for plates with a thickness of, mm:
    >9-12 mm % not less 26
    >12-19 mm % not less 24
    >19-30 mm % not less 22

     

    Thickness swelling after cyclic test, %
    The norm for plates with a thickness of, mm:
    >9-12 mm – 16 %
    >12-19 mm – 15 %
    >19-30 mm – 15 %

     

    Transverse tensile strength, MPa, not less
    The norm for plates with a thickness of, mm:
    >9-12 mm % not less 0,25
    >12-19 mm % not less 0,20
    >19-30 mm % not less 0,15

     

    Roughness, mkm 16÷32

    Plate format (2440х1830, 2440х1220)

    Moisture-resistant MDF, unlike conventional, has a denser structure. As a result, the plate is not subjected to swelling, and its surface is not destroyed by the action of condensate.

    They are recommended for the manufacture of kitchen countertops, door panels, window sills, bathroom furniture, floor bases (including varnishing), finishing of damp and unheated rooms

      ×

        ×