ОАО "Витебскдрев"
Fiberboard
Fiberboard
previous arrow
next arrow
previous arrownext arrow
Slider
  • Wood fiber plates Of the TS brand of the wet production method are made on the equipment"ZGODA"(Poland).

  • Fiberboard is Produced using mainly the technology of hot pressing formed wood-wool carpet with the addition of special components and binding additives, if necessary. Prokleivat the substances are paraffin emulsion and phenol formaldehyde resin.

  • Fiberboard is also made with a paint coating.

Physical and mechanical indicators of fiberboard

Fiberboard1
Bending strength, Мpa – no less 38
Fiberboard2
Swelling in thickness per 24 hours, %– not higher 20
Fiberboard3
Density, kg/m3 – from 930 to 1000
Fiberboard4
Humidity, % - from 5 to 10

Plate size


Fiberboard5

Packing scheme
  1. Board of the pan - 32х100mm;
  2. pallet bar(57х80);
  3. Fiberboard stop;
  4. lining of waste;
  5. metal corner;
  6. longitudinal belt of metal tape;
  7. cross belt of metal tape.

Packing scheme
Loading rate in vehicles
  • In covered two-door wagon

    3,2 mm. – 5 000 sheets – 23 332,5 m2(unpacked)
    2,5 mm. – 6 000 sheets – 27 999 m2 (unpacked)
    3,2 mm. – 4 800 sheets – 22 399,2 m2 (packed)

  • In eurotruck

  • In covered two-door wagon

    11 packs / 150 sheets – 7 699,727 m2
×
×